![]() If using JFFS2 do NOT flash with BrainSlayer-V24-preSP2 builds!! DD-WRT v24 sp1 will brick this router! v.24sp2 NEWD/NEWD-2 mini and mega will work fine.ASUS WL-500g Premium - USB on ASUS WL-500gP.v2.This is not a comprehensive list of Supported Devices, just a few which support USB: The use of standard USB hubs allows other USB devices (such as printers, serial ports, CD/DVD drives and audio) to remain connected even while the USB interface is used for flash cards or hard drive interfaces. A USB-compatible router can provide pretty much all of the NSLU2's capabilities (at a comparable price) plus offer all of the capabilites of a standard router and a wireless access point. Mounting a USB storage device as /opt provides nearly-unlimited space to install many applications from the large collection of Optware packages, ported to embedded Linux originally for use with the Linksys "slug" (NSLU2) USB network-attached storage servers.Instead of abruptly running out of memory when the 32Mb of physical RAM in these units is full, a portion is swapped to disc and the applications continue to run normally, but with a speed penalty. A USB hard drive can also be used as virtual memory by creating swap space.Most standard internal hard drives (notebook or desktop) can be converted simply by installing them in an inexpensive USB enclosure. A USB hard drive can be used as network-attached storage, shared by all computers on a LAN using SSH (scp), FTP, Samba or NFS.USB flash devices are also available as one self-contained unit: a small "tag" which can store up to several gigabytes of data. Any of the various card types, including CompactFlash and SD, are suitable. ![]() Just drop any old digital camera card into a USB flash card reader and easily expand the storage space of your Linux-based router. The use of a USB-compatible router makes the SD/MMC modification unnecessary.If you have technical questions, scroll down and look at the rest of the guide, or go to the forum. In Windows, click Tools, Map Network Drive, click Browse and it should (eventually) show up. Now add a user if you like (because you clicked 'public' you don't need one, but if you want user/pass authentication, set it here). Give the share a name (Seagateroot) tick Public and leave it on Read/Write. Leave Subdir empty if you want to access the whole drive. Select the partition from the drop-down (/mnt/sda1). Minimum and Maximum Protocol Version: SMB 3.11. Server String is whatever you like (a description, the actual samba name will be your router name, by default: DD-WRT). If you open up a shell (telnet/ssh), you should be able to do an 'ls' on /tmp/mnt/sda1 or where-ever it mounted your partition, and see the contents the same as you would with Windows Explorer. Save/Apply and you should see your partition mounted by the router below. In DD-WRT: Services, USB, Enable Core USB Support, Enable USB Storage support. Plug the drive into the available USB port. For this example, we are using a Seagate SATA drive with a USB3.0 to SATA adapter, already formatted in exFAT and already successfully plugged in and used on a Windows 7 device. One router that supports DD-WRT, with DD-WRT installed. It is excessively complex and antiquated in many areas for current versions of DD-WRT. Current How-to / Quick guide (April 2021)Īfter getting USB storage running and shared out (NAS) on my network, then I looked at this guide. 5.2.3 On a Buffalo WBMR-HP-G300H with WD MyPassport 500GB.5.2.2 On a WRT350N with 2GB SanDisk Cruzer Titanium flash disk.4.4 Create a startup script that loads the modules.4 DD-WRT versions WITHOUT built-in USB support.3.5.5 V24-Step 7 - Auto-run the extra software at boot-time.3.5.4.2 Option 6.2 - Extra software the Optware way. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |